|
SONY VPL-SX236 SHORT THROW PROJECTOR | Display System | 3 LCD system |
|---|
Display device| Size of effective display area | 0.63” (16.0 mm) x 3 BrightEra LCD Panel, Aspect ratio: 4:3 |
|---|
| Number of pixels | 2,359,296 (1024 x 768 x 3) pixels |
|---|
Projection lens| Focus | Manual |
|---|
| Throw Ratio | 0.46:1 |
|---|
Light source| Type | Ultra high pressure mercury lamp |
|---|
| Wattage | 210 W type |
|---|
Recommended lamp replacement time *1| Lamp mode: High | 4000 H |
|---|
| Lamp mode: Standard | 6000 H |
|---|
| Lamp mode: Low | 10000 H |
|---|
Filter cleaning / replacement cycle (Max.) *1| Filter cleaning / replacement cycle (Max.) | Maximum 7000 H (cleaning) |
|---|
Screen size| Screen size | 60” to 110” (1.52 m to 2.79m) (measured diagonally) |
|---|
Light output| Lamp mode: High | 3300 lm |
|---|
| Lamp mode: Standard | 2400 lm |
|---|
| Lamp mode: Low | 1900 lm |
|---|
Color light output| Lamp mode: High | 3300 lm |
|---|
| Lamp mode: Standard | 2400 lm |
|---|
| Lamp mode: Low | 1900 lm |
|---|
Contrast ratio (full white / full black) *2| Contrast ratio (full white / full black) *2 | 3000:1 |
|---|
Speaker| Speaker | 16 W x 1 (monaural) |
|---|
Displayable scanning frequency| Horizontal | 15 kHz to 92 kHz |
|---|
| Vertical | 48 Hz to 92 Hz |
|---|
Display resolution| Computer signal input | Maximum display resolution: UXGA 1600 x 1200 dots*3 |
|---|
| Video signal input | NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, The following items are available for digital signal (HDMI input) only;1080/60p,1080/50p |
|---|
Color system| Color system | NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N |
|---|
Keystone correction (Max.)OSD language| OSD language | 24-languages (English, Dutch, French, Italian, German, Spanish, Portuguese, Turkish, Polish, Russian, Swedish, Norwegian, Japanese, Simplified Chinese, Traditional Chinese, Korean, Thai, Vietnamese, Arabic, Farci, Finnish, Indonesian, Hungarian, Greek) |
|---|
INPUT OUTPUT (Computer/Video/Control)| INPUT A | RGB / Y PB PR input connector: Mini D-sub 15-pin (female)
Audio input connector: Streo mini jack |
|---|
| INPUT B | RGB input connector: Mini D-sub 15-pin (female)
Audio input connector: Stereo mini jack |
|---|
| INPUT C | HDMI input connector: HDMI 19-pin, HDCP support |
|---|
| S VIDEO IN | S Video input connector: Mini DIN 4-pin
Audio input connector: Pin jack x2 (shared with VIDEO IN) |
|---|
| VIDEO IN | Video input connector: pin jack, Audio input connector: Pin jack x2 (shared with S VIDEO IN) |
|---|
| OUTPUT | Monitor output connector*4: Mini D-sub 15-pin (female)
Audio output connector*5: Stereo mini jack (variable out) |
|---|
| REMOTE | RS-232C connector: D-sub 9-pin (male) |
|---|
| LAN | RJ-45, 10BASE-T/100BASE-TX |
|---|
| USB | Type-A |
|---|
| USB | Type-B |
|---|
| MICROPHONE IN | Microphone input: Mini jack |
|---|
Acoustic noiseOperating temperature / Operating humidity| Operating temperature / Operating humidity | 0°C to 40°C (32°F to 104°F) / 20% to 80% (no condensation) |
|---|
Storage temperature / Storage humidity| Storage temperature / Storage humidity | -10°C to +60°C (14°F to +140°F) / 20% to 80% (no condensation) |
|---|
Power requirements| Power requirements | AC 100 V to 240 V 3.2 A to 1.3 A, 50/60 Hz |
|---|
Power consumption| AC 100 V to 120 V | Lamp mode : High : 308 W |
|---|
| AC 220 V to 240 V | Lamp mode : High : 297 W |
|---|
Standby mode power consumption| AC 100 V to 120 V | 0.5 W (when “Standby mode” is set to “Low”) |
|---|
| AC 220 V to 240 V | 0.5 W (when “Standby mode” is set to “Low”) |
|---|
Power Consumption (Networked Standby Mode)| AC 100 V to 120 V | 5.0W (LAN)
5.6W (optional WLAN module)
5.8W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard") |
|---|
| AC 220 V to 240 V | 5.3W (LAN)
5.9W (optional WLAN module)
6.0W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard") |
|---|
Standby Mode / Networked Standby Mode Activated| Standby Mode / Networked Standby Mode Activated | After about 10 Minutes |
|---|
Wireless Network(s) On/Off Switch| Wireless Network(s) On/Off Switch | 1) Press the MENU button, then select [Connection/Power]
2) [WLAN Settings]
3) [WLAN Connection]
4) Select On or Off |
|---|
Heat dissipation| AC 100 V to 120 V | 1051 BTU/h |
|---|
| AC 220 V to 240 V | 1014 BTU/h |
|---|
Dimensions (W x H x D)| Dimensions (W x H x D) (without protrusions) | Approx. 365 x 138.7 x 310 mm (14 3/8 x 5 15/32 x 12 7/32 inches) |
|---|
Mass| Mass | Approx. 4.4 kg (9 lb) |
|---|
Supplied accessoriesOptional Accessories| Replacement lamp | LMP-E212 |
|---|
| Wireless LAN module | IFU-WLM3 |
|---|
Notes| *1 | This figure is expected maintenance time, not guaranteed time. The actual value depends on the environment and how the projector is used. |
|---|
| *2 | The value is average. |
|---|
| *3 | Available for VESA Reduced Blanking signal. |
|---|
| *4 | From INPUT A and INPUT B. |
|---|
| *5 | Works as an audio switcher function. |
|---|
|
