SONY VPL-SX630 ULTRA SHORT THROW PROJECTOR Display System | 3 LCD system |
---|
Display deviceSize of effective display area | 0.63” (16.0 mm) x 3 BrightEra LCD Panel, Aspect ratio: 4:3 |
---|
Number of pixels | 2,359,296 (1024 x 768 x 3) pixels |
---|
Projection lensFocus | Manual |
---|
Zoom - Powered/Manual | Manual |
---|
Zoom - Ratio | Approx. x 1.03 |
---|
Throw Ratio | 0.27:1 to 0.27:1 |
---|
Lens shift - Powered/Manual | Manual |
---|
Lens shift - Range Vertical | +/- 3.1% |
---|
Lens shift - Range Horizontal | +/- 2.3% |
---|
Light sourceType | Ultra high pressure mercury lamp |
---|
Wattage | 225 W type |
---|
Recommended lamp replacement time *1Lamp mode: High | 3000 H |
---|
Lamp mode: Standard | 5000 H |
---|
Lamp mode: Low | 8000 H |
---|
Filter cleaning / replacement cycle (Max.) *1Filter cleaning / replacement cycle (Max.) | Same time as the lamp replacement is recommended |
---|
Screen sizeScreen size | 70" to 115” (1.78 m to 2.92 m) (measured diagonally) |
---|
Light outputLamp mode: High | 3200 lm |
---|
Lamp mode: Standard | 2600 lm |
---|
Lamp mode: Low | 2100 lm |
---|
Color light outputLamp mode: High | 3200 lm |
---|
Lamp mode: Standard | 2600 lm |
---|
Lamp mode: Low | 2100 lm |
---|
Contrast ratio (full white / full black) *2Contrast ratio (full white / full black) *2 | 3000:1 |
---|
SpeakerSpeaker | 16 W x 1 (monaural) |
---|
Displayable scanning frequencyHorizontal | 15 kHz to 92 kHz |
---|
Vertical | 48 Hz to 92 Hz |
---|
Display resolutionComputer signal input | Maximum display resolution: UXGA 1600 x 1200 dots*3 |
---|
Video signal input | NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, The following items are available for digital signal (HDMI input) only;1080/60p,1080/50p |
---|
Color systemColor system | NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N |
---|
Keystone correction (Max.)OSD languageOSD language | 24-languages (English, Dutch, French, Italian, German, Spanish, Portuguese, Turkish, Polish, Russian, Swedish, Norwegian, Japanese, Simplified Chinese, Traditional Chinese, Korean, Thai, Vietnamese, Arabic, Farci, Finnish, Indonesian, Hungarian, Greek) |
---|
INPUT OUTPUT (Computer/Video/Control)INPUT A | RGB / Y PB PR input connector: Mini D-sub 15-pin (female) Audio input connector: Streo mini jack |
---|
INPUT B | RGB input connector: Mini D-sub 15-pin (female) Audio input connector: Stereo mini jack |
---|
INPUT C | HDMI input connector: HDMI 19-pin, HDCP support |
---|
S VIDEO IN | S Video input connector: Mini DIN 4-pin Audio input connector: Pin jack x2 (shared with VIDEO IN) |
---|
VIDEO IN | Video input connector: pin jack Audio input connector: Pin jack x2 (shared with S VIDEO IN) |
---|
OUTPUT | Monitor output connector*4: Mini D-sub 15-pin (female) Audio output connector*5: Stereo mini jack (variable out) |
---|
REMOTE | RS-232C connector: D-sub 9-pin (male) |
---|
LAN | RJ-45, 10BASE-T/100BASE-TX |
---|
USB | Type-A |
---|
USB | Type-B |
---|
MICROPHONE IN | Microphone input: Mini jack |
---|
Acoustic noiseOperating temperature / Operating humidityOperating temperature / Operating humidity | 0°C to 40°C (32°F to 104°F) / 20% to 80%(no condensation) |
---|
Storage temperature / Storage humidityStorage temperature / Storage humidity | -10°C to +60°C (14°F to +140°F) / 20% to 80% (no condensation) |
---|
Power requirementsPower requirements | AC 100 V to 240 V, 3.2 A to 1.4 A, 50 Hz / 60 Hz |
---|
Power consumptionAC 100 V to 120 V | Lamp mode : High : 318 W |
---|
AC 220 V to 240 V | Lamp mode : High : 306 W |
---|
Standby mode power consumptionAC 100 V to 120 V | 0.5 W (when “Standby mode” is set to “Low”) |
---|
AC 220 V to 240 V | 0.5 W (when “Standby mode” is set to “Low”) |
---|
Power Consumption (Networked Standby Mode)AC 100 V to 120 V | 5.2 W (LAN) 5.7 W (optional WLAN module) 5.9 W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard") |
---|
AC 220 V to 240 V | 5.5 W (LAN) 5.9 W (optional WLAN module) 6.2 W (ALL Terminals and Networks Connected, when "Standby Mode" is set to "Standard") |
---|
Standby Mode / Networked Standby Mode ActivatedStandby Mode / Networked Standby Mode Activated | After about 10 Minutes |
---|
Wireless Network(s) On/Off SwitchWireless Network(s) On/Off Switch | 1) Press the MENU button, then select [Connection/Power] 2) [WLAN Settings] 3) [WLAN Connection] 4) Select On or Off |
---|
Heat dissipationAC 100 V to 120 V | 1085 BTU/h |
---|
AC 220 V to 240 V | 1044 BTU/h |
---|
Dimensions (W x H x D)Dimensions (W x H x D) (without protrusions) | Approx. 372 x 168 x 382 mm (14 21/32 x 5 7/16 x 15 1/32 inches) |
---|
MassMass | Approx. 6.0 kg (13 lb) |
---|
Supplied accessoriesOptional AccessoriesReplacement lamp | LMP-E220 |
---|
Wireless LAN module | IFU-WLM3 |
---|
|